Submitted ideas will be evaluated by our product teams for upcoming releases and will be responded to so you know where things stand. For product support, please use the community forums or contact TAC.
NOTE: All Cisco employees & Channel Partners must enter Ideas through this Ideas Portal.
In TMS "Systems overview" we can obtain the Codec S/N, software version. But not the Touch10 S/N nor the camera type, connected to the codec. If I'm purchasing a Touch10 separately and want to check few months later where it was installed or if still connected...I have to check the codecs one by one. Recently I was looking for the SX20-2.5x Cameras(soon End of Life), there is no way to obtain that Info from TMS. Even if available on the codec (Configuration/Peripherals). Same if I want to have a quick overview of the displays connected to the codec, name, screen size , resolution, etc...Then an "Inventory" button available on TMS will be very helpful. I'd like to make sure that all the components are covered by a Maintenance contract.
Here are the required informations(at least):
System Unit :
Serial Number
Software version
Installed Options
System Name
IPv4
MAC address
Peripherals:
Cameras
Camera Model
Software ID
Serial Number
Video Outputs
Monitor 1
Name
Screen Size
Preferred format
Model Name
Serial Number
Monitor 2
Name
Screen Size
Preferred format
Model Name
Serial Number
Cisco Telepresence Touch
Status
Hardware version
Software version
Serial Number